CASTROL AIRCOL CM 68 20L DRUM

Castrol Aircol™ CM are high-quality compressor oils made from highly refined mineral oil, enhanced with additive technology, offering excellent thermal and oxidation stability, as well as good load-carrying capacity compared to other products in the same class.

Application

Aircol CM oils, formulated without zinc (ashless oils), are recommended for lubricating reciprocating and screw compressors.

Aircol CM is classified as: ISO 6743-3 Compressor Oils DAA and DAB for reciprocating and rotary air compressors with drip feed DAG and DAH for oil-flooded rotary air compressors

Aircol CM compressor oils have a low tendency to form carbon deposits and meet the DIN 51506 VDL requirements for reciprocating compressors with discharge temperatures up to 220°C. For oil-flooded and screw compressors operating continuously at temperatures above 90°C. The product is designed to offer oil change intervals of up to 4000 hours. For intermittent or continuous temperatures above 90°C, the manufacturer's recommended change intervals must be followed. Its high FZG load-carrying capacity makes it suitable for compressors with gears.

Viscosity selection should be based on the manufacturer's recommendations. However, as a general guide, Aircol CM 32 and 46 are suitable for rotary compressors, while Aircol CM 68, CM 100, and 150 are recommended for crankcase and cylinder lubrication in reciprocating compressors. Aircol CM 150 is also recommended for vane compressors or reciprocating units operating at high temperatures. Aircol CM is fully compatible with Castrol Aircol PD and Castrol MR.